ST200 Wireless Crane Remote Control Set - 2 Channel

ST200 Wireless Crane Remote Control Set - 2 Channel

Rechargeable IP67 remote + IP67 outdoor receiver. 150m range.

ST200 — 2 Channel (IP67 Outdoor Type) is the most field-durable set in the AXI series, combining a professional rechargeable IP67 transmitter with a fully IP67 outdoor receiver. It is designed for maximum reliability in tough field conditions for crane, platform, sliding-door and DC motor direction control.

When the transmitter's powerful Li-Po battery, IP67 sealing and ~150 m range are combined with the receiver's fully sealed body, cable glands and gasket system, ST200 becomes a premium solution that runs trouble-free outdoors for years.

› IP67 on both ends. The transmitter and receiver are fully sealed together — run the system in rain, dust and mud on sites that don't even have a panel.

ST200 at a Glance

⚡ Transmitter
Li-Po rechargeable · IP67
◆ Range
~150 m open field
⚙ Receiver
IP67 outdoor · fully sealed
○ Supply
12/24V DC · 220V AC
⇄ Channels
2 channels — forward/reverse
○ Durability
Impact · dust · water · humidity
★ Segment
Premium field

Key Features

✓ Dual-side IP67
Both transmitter and receiver are fully sealed. Direct field installation with no panel required.
✓ Li-Po rechargeable transmitter
Long shift duration with no battery purchases. High field-grade impact resistance.
✓ 150 m range
Strong, stable communication in open field. A single transmitter is enough for large farms and job sites.
✓ Cable-gland entries
Every cable entering the receiver maintains the seal via a gasket and gland — long field life.
✓ Impact and water resistance
Heavy-duty cover & body; resistant to rain, mud and job-site dust.
✓ Plug & play
Requires no complex software; pair, power and use it in the field.

How Does It Work?

1
Receiver mounting
Fix the IP67 receiver right next to the motor, outdoors.
2
Cable entries
Route the supply, motor and control cables through the IP67 cable glands.
3
Charge the transmitter
Fully charge the LT200 before first use; pair it with the receiver.
4
Run outdoors
Uninterrupted forward–reverse direction control in rain, dust and humidity.

ST100 vs ST200 — Which Should I Choose?

CriterionST100 / ST200
◆ Receiver protectionST100: In-panel (LF100R) · ST200: IP67 outdoor
◆ TransmitterLi-Po rechargeable IP67 in both
◆ Range~150 m (in both sets)
◆ Relay outputST100: 10A, COM/NO/NC · ST200: 5A, COM/NO (no NC)
◆ Best choiceST100: Installations with a panel · ST200: Field use without a panel

Technical Specifications

ModelST200 (2 channels)
TransmitterRechargeable Li-Po · IP67 · ~150 m range · heavy-duty build
ReceiverIP67 outdoor · sealed body · cable-gland entry · 2×5A relay (COM/NO, no NC)
Supply12/24V DC or 220V AC
Control typeForward – Reverse / On – Off DC motor control
Protection classTransmitter IP67 · Receiver IP67
ApplicationOutdoor doors, platforms, cranes, DC motor systems

Use Cases

SectorBenefit
◆ Outdoor doors and gatesFull sealing, sealed control for years.
◆ Heavy-duty platforms & cranesSafe operation on construction sites and ports.
◆ Farms and agricultural fieldsDurable communication in dusty and humid environments.
◆ Port & coastal automationResistance to salt air and humidity.

Relay Output: AC/DC Motor and Contactor Wiring

Each channel of the receiver is a 5A relay with COM and NO terminals (no NC). Since these are dry contact relays, they can drive both DC loads and 220V/380V AC motors — even powerful star-delta AC motors can be driven with a suitable contactor and panel setup.

Relay output2 × 5A (COM · NO (no NC))
Direct AC motor connectionUp to 350W
Above 350W / for longer lifeA contactor is recommended
DC motor speed/ramp controlThe relay output can trigger the manual control input of AXI DC motor drivers (ST42 / KS250 / PT500) for current-protected, ramped and speed-adjustable control
› Want speed-adjustable, current-protected DC motor control? Instead of wiring the relay output directly to the motor, connect it to the manual control input of AXI's ST42 / KS250 / PT500 DC motor drivers — you gain current limiting, soft start/stop ramping and speed control. Wiring diagrams are being prepared and will be added to this page's technical documents section once available.

What's in the Box

✓ IP67 rechargeable transmitter (2 channels)
✓ IP67 outdoor receiver
✓ AXI-Link charging adapter and cable
✓ Antenna and cable glands
✓ Wiring diagram
✓ User manual

Demo Videos

ST200 — 2 Channel — AXI Teknoloji's premium dual-side IP67 sealed wireless control set built for outdoor conditions.