ST100 Wireless Crane Remote Control Set - 4 Channel

Rechargeable Li-Po remote (IP67) + in-panel 4-channel relay receiver. 150m range.

ST100 — 4 Channel is a heavy-duty control set composed of the professional IP67 rechargeable LT200 transmitter and an in-panel receiver, allowing you to manage two motors or a multi-axis mechanism from a single transmitter. It is ideal when more than one motion needs to be controlled from a single hand — twin-motor cranes, dual-axis platforms, door + curtain combinations.

When the LT200's Li-Po rechargeable battery, IP67 sealing and ~150 m open-field range combine with 4 independent channels, you can comfortably manage either two machines bound to a single operator's transmitter or complex direction combinations.

› Two machines, one transmitter. Stop swapping operators with a second transmitter on twin-motor systems — with 4 channels, everything is at your fingertips.

ST100 — 4 Channel at a Glance

⚡ Transmitter
LT200 · Li-Po rechargeable · IP67
◆ Range
~150 m open field
⚙ Receiver
In-panel · relay output
⇄ Channels
4 independent channels
○ Supply
12/24V DC · 220V AC
★ Class
Heavy-duty type

Key Features

✓ 4 independent channels
Manage two motors forward–reverse separately, or four different functions on a single machine, from one transmitter.
✓ IP67 rechargeable transmitter
Field-grade LT200, resistant to drops and water spray — at end of shift, charge instead of changing batteries.
✓ 150 m range
Safe control across large sites; signal drop near the range limit is minimal.
✓ Parallel manual + RF
Existing button wiring continues to work; parallel control with RF.
✓ Flexible supply
12/24V DC or 220V AC — fits the panel type.
✓ Solid and long-life
Mechanical and electronic structure designed for industrial field use.

Typical 4-Channel Scenarios

ScenarioChannel mapping
◆ Twin-motor platformCH1–CH2: Motor A forward/reverse · CH3–CH4: Motor B forward/reverse
◆ Crane + boomCH1–CH2: Crane up/down · CH3–CH4: Boom extend/retract
◆ Door + barrierCH1–CH2: Door open/close · CH3–CH4: Barrier open/close
◆ X/Y actuatorCH1–CH2: X axis · CH3–CH4: Y axis

How Does It Work?

1
Receiver installation
Mount the receiver in the panel; choose DC or AC supply.
2
4-channel wiring
Wire each channel's relay output to the corresponding motor/valve direction line.
3
Transmitter & charge
Fully charge the LT200 and register it with the receiver via the learning procedure.
4
Take it to the field
Manage four motions in one hand; existing buttons can stay active in parallel.

Technical Specifications

ModelST100 (4 channels)
TransmitterLT200 · Li-Po rechargeable · IP67 · ~150 m range
ReceiverIn-panel · 4-channel relay output
Supply12/24V DC or 220V AC
Control type4 channels — two motors forward/reverse or multi-direction
Parallel useManual button + RF remote at the same time

Use Cases

SectorBenefit
◆ Twin-motor cranesA single operator controls the main and auxiliary motors.
◆ Lifting + travel platformsManage vertical and horizontal axes from one transmitter.
◆ Door + curtain combosOne device for two separate actuators in the same building.
◆ Robotic X/Y systemsSimple positioning on dual-axis actuators.

What's in the Box

✓ LT200 rechargeable transmitter (4 channels · IP67)
✓ 4-channel in-panel receiver
✓ AXI-Link charging adapter and cable
✓ Antenna
✓ Wiring diagram
✓ User manual

Demo Videos

ST100 — 4 Channel — AXI Teknoloji's heavy-duty wireless control set that manages two motors or a multi-direction mechanism from a single hand.