ST100 Wireless Crane Remote Control Set - 2 Channel

ST100 Wireless Crane Remote Control Set - 2 Channel

Rechargeable Li-Po remote (IP67) + in-panel 2×10A relay receiver. 150m range.

ST100 — 2 Channel is a durable, long-life heavy-duty control set that combines the professional IP67 rechargeable LT200 transmitter with the in-panel LF100R receiver. It is designed for forward–reverse DC motor control in platform systems, door mechanisms, crane applications and industrial automations that demand high reliability.

The combination of the LT200's rechargeable Li-Po battery, full IP67 sealing and ~150 m open-field range with the LF100R receiver's 2×10A relay-based motor control architecture makes ST100 a solution that is both powerful in the field and durable over the long term.

› Not battery-powered — a rechargeable professional transmitter. Place it on the charging station at end of shift instead of swapping batteries — uninterrupted field use thanks to a drop- and splash-resistant IP67 body.

ST100 at a Glance

⚡ Transmitter
LT200 · Li-Po rechargeable · IP67
◆ Range
~150 m open field
⚙ Receiver
LF100R · 2×10A relay
⇄ Channels
2 channels — forward/reverse
○ Supply
12/24V DC · 220V AC
★ Class
Heavy-duty type

Key Features

✓ IP67 rechargeable transmitter
Fully sealed body — resistant to rain, dust and impact. The battery doesn't run out — it recharges.
✓ 150 m range
Strong open-field communication; ~50% more safe coverage than SF100's ~100 m range.
✓ Field-grade build
Professional design suited to drops, harsh field conditions and long-shift use.
✓ 2×10A relay outputs
DC motor forward–reverse control via the in-panel LF100R receiver; no contactor needed.
✓ Parallel control
Manual button + RF remote at the same time — modernization without disturbing existing wiring.
✓ Flexible supply
Receiver runs on 12/24V DC or 220V AC; fits different panel infrastructures.

How Does It Work?

1
Receiver installation
Mount the LF100R in the panel; choose the supply (DC or AC).
2
Motor connection
Wire the 2×10A relay outputs to the DC motor's direction lines.
3
Charge the transmitter
Fully charge the LT200 before first use and pair it with the receiver via learning.
4
Take it to the field
Safe control up to 150 metres — place it on the dock at end of shift.

ST100 vs SF100 — Which Should I Choose?

CriterionST100 / SF100
◆ Transmitter typeST100: Li-Po rechargeable IP67 · SF100: 3×AAA battery, IP64
◆ RangeST100: ~150 m · SF100: ~100 m
◆ Use intensityST100: Multi-shift / heavy-duty · SF100: Light / medium
◆ ReceiverLF100R · 2×10A relay · in-panel in both

Technical Specifications

ModelST100 (2 channels)
TransmitterLT200 · Li-Po rechargeable · IP67 · ~150 m range · heavy-duty type
ReceiverLF100R · 2×10A relay outputs (COM/NO/NC) · in-panel
Supply12/24V DC or 220V AC
Control typeForward – Reverse / On – Off DC motor control
Parallel useManual button + RF remote at the same time

Use Cases

SectorBenefit
◆ Heavy-duty platformsRechargeable transmitter on long shifts, field-grade reliability.
◆ DC motor direction controlSafe 2×10A capacity in lifting / handling systems.
◆ Sliding doors & gatesRemote control while preserving existing wiring.
◆ Light/medium cranesContinuous use in workshops and warehouses.
◆ Valve triggeringRemote opening/closing of pneumatic / hydraulic valves.
◆ Outdoor fieldSafe outdoor use thanks to the IP67 transmitter.

Relay Output: AC/DC Motor and Contactor Wiring

Each channel of the receiver is a 10A relay with COM, NO and NC terminals. Since these are dry contact relays, they can drive both DC loads and 220V/380V AC motors — even powerful star-delta AC motors can be driven with a suitable contactor and panel setup.

Relay output2 × 10A (COM · NO · NC)
Direct AC motor connectionUp to 750W
Above 750W / for longer lifeA contactor is recommended
DC motor speed/ramp controlThe relay output can trigger the manual control input of AXI DC motor drivers (ST42 / KS250 / PT500) for current-protected, ramped and speed-adjustable control
› Want speed-adjustable, current-protected DC motor control? Instead of wiring the relay output directly to the motor, connect it to the manual control input of AXI's ST42 / KS250 / PT500 DC motor drivers — you gain current limiting, soft start/stop ramping and speed control. Direct-motor and contactor wiring diagrams are available for download in this page's technical documents section.

What's in the Box

✓ LT200 rechargeable transmitter (2 channels · IP67)
✓ LF100R in-panel receiver (2×10A relay)
✓ AXI-Link charging adapter and cable
✓ Antenna
✓ Wiring diagram
✓ User manual

Demo Videos

ST100 — 2 Channel — AXI Teknoloji's heavy-duty control set combining an IP67 rechargeable professional transmitter with an in-panel receiver.