SF100 is a compact, durable 2-channel directional control set that pairs the economical battery-powered LF200 transmitter with the in-panel LF100R receiver. It is designed for industrial lifting mechanisms, platform systems, sliding doors and any automation project that requires forward–reverse direction control of DC motors.
It delivers professional-grade stability at an accessible price. With plug-and-play installation, simultaneous RF + manual button control and ~100 metres of open-field range, it is a reliable solution for both industrial environments and simple projects.
› Manual + wireless at the same time. Parallel control via RF remote without removing your existing button wiring — fast, low-risk modernization.
SF100 at a Glance
⚡ Transmitter
LF200 · 3×AAA batteries
◆ Range
~100 m open field
⚙ Receiver
LF100R · 2×10A relay
⇄ Channels
2 channels — forward/reverse
○ Protection
Transmitter IP64
★ Supply
12/24V DC or 220V AC
Key Features
✓ Economical + professional
Industrial-grade stability at an accessible price. Performs from light, simple projects to multi-shift use.
✓ 2×10A relay outputs
Safely controls forward–reverse direction of DC motors with no contactor required.
✓ Parallel control
Manual button + RF remote work simultaneously. The existing wiring is preserved — no new cables required.
✓ Flexible supply
The LF100R receiver runs on 12/24V DC and 220V AC — fits different panel infrastructures.
✓ IP64-protected transmitter
Protection against dust and light water spray — safe for field conditions.
✓ Light and ergonomic
The compact 3×AAA-powered transmitter doesn't tire the hand during long shifts.
How Does It Work?
1
Place the receiver in the panel
Mount the LF100R in the panel; supply with 12/24V DC or 220V AC.
2
Connect the motor
Wire the relay outputs to the forward/reverse leads of the DC motor.
3
Pair the transmitter
Insert batteries into the LF200 and register it with the receiver via the learning procedure.
4
Run in parallel
Existing manual buttons and the RF remote are used simultaneously.
Technical Specifications
| Model | SF100 (2 channels) |
| Transmitter | LF200 · 3×AAA batteries · ~100 m range · IP64 |
| Receiver | LF100R · 2×10A relay outputs · in-panel design |
| Supply | 12V / 24V DC or 220V AC |
| Control type | Forward – Reverse / On – Off DC motor control |
| Parallel use | Manual button + RF remote simultaneously |
| Channel options | 2 / 4 / 6 channel versions available |
Use Cases
| Sector | Benefit |
|---|---|
| ◆ Lift–lower platforms | The operator stays next to the load — safe one-handed positioning. |
| ◆ Sliding door mechanisms | Fast remote opening/closing with no intervention to existing wiring. |
| ◆ Light industrial cranes | Compact lifting systems for workshops and warehouses. |
| ◆ Pneumatic / hydraulic valves | Remote-triggered valve control — operator safety improves. |
| ◆ Mini lift & load platform | An economical, reliable direction-control solution. |
What's in the Box
✓ LF200 wireless transmitter (2 channels)
✓ LF100R in-panel receiver (2×10A relay)
✓ Antenna
✓ Wiring diagram
✓ User manual
Demo Videos
SF100 — AXI Teknoloji's 2-channel wireless control set combining an economical battery-powered transmitter with an in-panel receiver.